FASTEST HH MOTOR TILL NOW DESIGNED

with Armature 5800

Premium HD HH motor Skipper is a powerful motor designed for rotating a satellite dish.  The satellite Receiver has full automatic control using the DiSEqC 1.2, USALS and “Go To X” commands to operate this motor.

THIS HH MOTOR IS FASTEST HH MOTOR TILL NOW DESIGNED,

 

Description

Premium hd HH motor Skipper is a powerful motor designed for rotating a satellite dish.  The satellite Receiver has full automatic control using the DiSEqC 1.2, USALS and “Go To X” commands to operate this motor.

note :In package of This hh motor is not available LNB.

Once the satellite positions have been programmed in the system, the motor returns the dish to exactly the correct location when you switch channels.

The principal of a motorized system is that the dish moves from east to west to track the satellites positioned along the Clarke belt.  It utilizes a data stream passed up the LNB co-axial lead to the mount. Only one co-axial cable (the one that goes to the LNBF) is needed for installation.

Features:

LED function

High Speed

Anti-rust

Ultra Low Noise

Auto-adjust Clearance

Zero Backlash Design

Technical data:

Operating protocol

DiSEqC TM 1.2/USALS compatible level and the 'GoToX' function

Horizontal Rotation

95° (99° max.)

Inclination (motor elevation)

75°

Maximum antenna diameter

120 cm Aluminum or 90 cm Steel

Programmable positions available

64 satellites

Maximum antenna mass gravity point

15 kg , when rotating the dish around the centre-of gravity

Antenna support length

120 mm

Bent motor pole diameter

42 mm

Rotation speed (unloaded)

2.3°/s (H-18V) 1.8°/s (V-14V) ±25%

Rotation speed (with a 80-cm dish)  

2.1°/s (H-18V) 1.5°/s (V-14V) ±25%

Powered via a coaxial cable

13 / 18 VDC

Power consumption in stand-by mode

15 mA ±25%

Power consumption in operating mode (with a 80-cm dish)

95-150 mA ±25%

Starting movement consumption (80 ms)

350 mA

Operating temperature

-25°C to +70°C

Operating humidity

35% to 100%

Connectors F type

7 mm

Connection

coaxial cable with an impedance of 75 F

Connection cable up to 30 

inner conductor CU ø 1.02 mm R=22 F/km

Connection cable up to 100m

inner conductor CU ø 1.13 mm R=18 F/km

EAST-WEST limits

hardware fixed, no programmable limit

Fine tuning step  

0.36°

Weight with box

2.8 kg

Maximum permissible wind speed for a 80-cm/120-cm dish

130 km/h/70 km/h (km per hour)

Maximum permissible torque during rotation

15 Nm

Maximum permissible torque on idle

150 Nm

Control buttons    

two (west-call and east-store)

Dimensions of packed into box

295 (L) x 132 (W) x 155 (H) mm

Speed

3.5°/sec (at 13V):4.4°/sec(at 18V)

Reviews

There are no reviews yet.

Be the first to review “HH Motor Skipper V9.0”

Your email address will not be published. Required fields are marked *

Go Top