Description
The Premium HD, HH motor 5000 PRO is a powerful motor designed for rotating a satellite dish. The satellite Receiver has full automatic control using the DiSEqC 1.2, USALS and “Go To X” commands to operate this motor, ITS 50% FASTER THAT NORMAL HH MOTORS.
Once the satellite positions have been programmed in the system, the motor returns the dish to exactly the correct location when you switch channels.
The principal of a motorized system is that the dish moves from east to west to track the satellites positioned along the Clarke belt. It utilizes a data stream passed up the LNB co-axial lead to the mount. Only one co-axial cable (the one that goes to the LNBF) is needed for installation.
Features:
LED function | High Speed |
Anti-rust | Ultra Low Noise |
Auto-adjust Clearance | Zero Backlash Design |
Technical data:
Operating protocol | DiSEqC TM 1.2/USALS compatible level and the 'GoToX' function |
Horizontal Rotation | 95° (99° max.) |
Inclination (motor elevation) | 75° |
Maximum antenna diameter | 120 cm Aluminum or 90 cm Steel |
Programmable positions available | 64 satellites |
Maximum antenna mass gravity point | 15 kg , when rotating the dish around the centre-of gravity |
Antenna support length | 120 mm |
Bent motor pole diameter | 42 mm |
Rotation speed (unloaded) | 2.3°/s (H-18V) 1.8°/s (V-14V) ±25% |
Rotation speed (with a 80-cm dish) | 2.1°/s (H-18V) 1.5°/s (V-14V) ±25% |
Powered via a coaxial cable | 13 / 18 VDC |
Power consumption in stand-by mode | 15 mA ±25% |
Power consumption in operating mode (with a 80-cm dish) | 95-150 mA ±25% |
Starting movement consumption (80 ms) | 350 mA |
Operating temperature | -25°C to +70°C |
Operating humidity | 35% to 100% |
Connectors F type | 7 mm |
Connection | coaxial cable with an impedance of 75 F |
Connection cable up to 30 | inner conductor CU ø 1.02 mm R=22 F/km |
Connection cable up to 100m | inner conductor CU ø 1.13 mm R=18 F/km |
EAST-WEST limits | hardware fixed, no programmable limit |
Fine tuning step | 0.36° |
Weight with box | 2.8 kg |
Maximum permissible wind speed for a 80-cm/120-cm dish | 130 km/h/70 km/h (km per hour) |
Maximum permissible torque during rotation | 15 Nm |
Maximum permissible torque on idle | 150 Nm |
Control buttons | two (west-call and east-store) |
Dimensions of packed into box | 295 (L) x 132 (W) x 155 (H) mm |
Speed | 3.5°/sec (at 13V):4.4°/sec(at 18V) |
Reviews
There are no reviews yet.